So you found a used pop-up camper you want to buy. Before you go pick it up, ask the seller to send you a picture of the coupler and the trailer plug. That’ll help you figure out what you need to bring and save you a trip to the parts store while the camper is still sitting in the seller’s driveway.
1. Hitch and the right ball
Look for the ball size stamped on the camper’s coupler. If it says 2 inches, bring a 2-inch ball. If the marking is worn off, confirm the size with the coupler manufacturer before towing. Check that your tow vehicle, hitch, ball mount, and ball can handle the camper’s loaded weight and tongue weight. Once you hook up, make sure the coupler is fully seated and the latch is secured.

2. Safety chains
The chains usually come with the camper, so check that they’re both there and that the links and hooks are in good shape. Cross the chains under the tongue and attach them to the hitch’s safety-chain loops. Leave enough slack to turn without letting the chains drag. If the coupler comes off the ball, the crossed chains can help catch the tongue.

3. A matching trailer plug
A flat 4-pin plug handles the basic trailer lights. If the camper has electric brakes, check that your tow vehicle has a compatible connection and a working trailer brake controller. A plug adapter by itself won’t add brake control. Before you leave, have someone stand behind the camper while you test the running lights, turn signals, and brake lights. If the camper has trailer brakes, test them too and attach the breakaway cable if it’s equipped with one.
4. Wheel chocks
Bring a pair of wheel chocks for when you get the camper home. Park on firm, level ground and place the chocks snugly in front of and behind a camper tire before you unhitch. It’s easy to get busy with the tongue jack and forget the camper can still roll.

5. A coupler lock
If the camper is going to sit in your driveway or at a storage lot, a coupler lock is worth bringing home with it. Look for one that fits the shape of your coupler. It makes it harder for someone to hitch up and drive off with the camper while it’s parked.
Before you pull away, take one last walk around. Check the latch, chains, plug, lights, and tires. Make sure the tongue jack is fully raised and secured, and pick up the wheel chocks. If the tongue jack is in rough shape be sure check out my post about a new Haul-Master trailer jack install. It’s a lot easier and safer to catch something in the driveway than after you’re on the road.
